we can produce the cable tray roll forming machine,cable tray making machine,cable tray rolling machine,cable tray production line,cable tray forming machinery,galvanized steel cable tray roll forming machine,cable tray rolled machine,full automatic cable tray machinery,galvanized cable tray rolling machinery.
The working flow of galvanized steel cable tray making machine :
Decoiler-----leveling ------feeding -----punching------ cutting----feeding frame---roll forming--collection table
The parameters of the cable tray making Machine:
The Suitable material of cable tray making machine: galvanized coils, etc
The thickness of cable tray making machine: 0.8-2.0mm
The Forming specifications of cable tray making machine: 100-600mm cable tray or as per need
The Forming speed of cable tray making machine: 5-15m/min
The Main motor power of cable tray making machine: 22KW
Servo feeding, high-speed punching, hydraulic cutting without wastes
Hydraulic pump station power: 5.5KW
The Control system of cable tray making machine: PLC controller, touch screen operation
Optional accessories: hydraulic uncoiler, etc
uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system.
The techincal description of cable tray making machine
Items
|
Parameter
|
Adapted raw material
|
Type
|
mild steel ,Galvanized strip coil and others
|
Hardness of sheet
|
≥350Map
|
Thickness of sheet
|
1~2.5 mm
|
Roll forming speed
|
10~15 m/min
|
Guding device
|
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets
|
Leveling device
|
11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls
|
Roller material
|
45# steel polished and coated with chrome HRC55-60°
|
Roller stands
|
15
|
Shaft diameter
|
70mm
|
Shaft material
|
high grade No.45 steel after treatment
|
Air supply
|
Flow rate
|
0.5m3/min
|
Pressure
|
0.7MPa
|
Driving way
|
chain driving
|
Punching device
|
Each kind of width specification 1 set dies
|
Punching die
|
Cr12 quench
|
Cutting type
|
hydraulic cutting after forming
|
Blade material
|
Cr12 steel after treatment
|
Main power
|
About 15KW
|
Hydraulic power
|
11kw
|
Controlling system
|
PLC Frequency Control System with touch screen
|
Terms
Payment type
|
30% T/T prepaid and balance should be paid before loading
|
Delivery time
|
45days after receving advance payment
|
Guarantee period
|
12months free service/ pay service all the machine life
|
Installation and training
|
If buyers visit our factory and check the machine,
we will teach you how to install and use the machine,
and also train your workers/technician face to face.
Without visiting,we will send you user manual and
video to teach you to install and operate.
|